What Is the littleBits o1 LED Bit?
The littleBits o1 LED (Light-Emitting Diode) Bit is a small board that shines a green light. It is designed to be a simple output for any littleBits circuit. When you connect it to a power source and a control or sensor Bit, it lights up instantly, making it one of the easiest ways to add visual feedback to your projects.
Because it is a basic output Bit, you can combine it with almost any littleBits input or control module—like a button, a slide dimmer, or a light sensor—to create interactive circuits. Its small size and straightforward operation make it ideal for introducing students to circuit-building and the input-output concept.
o1 LED Bit at a Glance
- littleBits o1 LED: The LED (or "Light-Emitting Diode") Bit is a very small board that shines a nice green light. Its small size and green light make it easy to see in a circuit, perfect for signaling or decoration.

littleBits o1 LED - littleBits o1 LED: Available only in the USA while supply lasts This is a limited-availability item, so educators in the US should plan purchases accordingly.
How to Build a Simple Circuit with the o1 LED
Follow these steps to create a basic circuit that lights the o1 LED Bit. You will need a power Bit (such as the littleBits p1 power Bit) and any input Bit (like a button or slide dimmer) to control the light.
- 1. Connect the power Bit: Attach a littleBits power Bit (e.g., p1 or p3) to the leftmost snap connector. Make sure the power switch is off before connecting anything else.
- 2. Add an input Bit (optional): Snap a control Bit, such as the littleBits i5 slide dimmer or i14 button, to the right of the power Bit. This will let you adjust the brightness or turn the LED on and off.
- 3. Attach the o1 LED Bit: Snap the o1 LED Bit to the right of the input Bit (or directly to the power Bit if you want a constant light). The green LED should be facing upward for best visibility.
- 4. Turn on the power: Slide the power switch to the 'on' position. The green LED should light up immediately. If you used an input Bit, try pressing the button or sliding the dimmer to see how it controls the light.
Project Ideas for the Classroom
The o1 LED Bit works well in projects that need a visual indicator. Here are a few simple ideas to try with students:
- **Status light**: Use the LED to show when a sensor (like a light sensor) detects darkness. Connect a light sensor Bit between the power and the LED, then cover the sensor to see the LED turn on.
- **Buzzer + LED alarm**: Combine the o1 LED with a littleBits buzzer Bit. When a button is pressed, both the LED and buzzer activate, creating a simple alarm.
- **Interactive art**: Embed the LED into a cardboard model or poster. When a viewer presses a button, the LED lights up to highlight a part of the display.
These projects require only a few Bits and are easy to set up in a single class period.
What the Supplied Information Does Not Cover
The catalog does not provide detailed operating instructions, voltage limits, or recommended usage time for the o1 LED. It also does not specify whether the LED can be used with a dimmer to produce variable brightness (though other littleBits LEDs often support this). For best results, treat this Bit as a simple on/off green light and test it with your specific Bits before planning a lesson.
Because the o1 LED is a basic Bit, it does not include any programming capability or data output. It is purely a hardware output module.

